PacDrive 3
Schneider Electric catalog image for this SKU; may represent the product family.
SERVO MOTOR
SH3 servomotor, 100mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, angular, IP65/65
SKU SH31002P11A2100Schneider Electric SH31002P11A2100 is a servo motor in the PacDrive 3 range. Key specifications include mounting support: International standard flange; ip protection: IP65 motor: conforming to IEC 60034-5; net weight: 5.8 kg.
International standard flangeMounting support
IP65 motor: conforming to IEC 60034-5IP protection
5.8 kgNet weight
PRODUCT DATA
Technical specifications
Source: Schneider Electric product catalog.
Verified September 18, 2026.
| Product reference | SH31002P11A2100 |
|---|---|
| Range compatibility | PacDrive 3 |
| Device short name | SH3 |
| Product or component type | Servo motor |
| Maximum mechanical speed | 6000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | 3 |
| Continuous stall current | 4.8 A |
| Continuous stall torque | 5.8 N.m at 115...480 V three phase |
| Continuous power | 1900 W |
| Peak stall torque | 18.3 N.m at 115...480 V three phase |
| Nominal output power | 580 W at 115 V single phase 1090 W at 230 V single phase 1930 W at 400 V three phase 2210 W at 480 V three phase |
| Nominal torque | 5.5 N.m at 115 V single phase 5.2 N.m at 230 V single phase 4.6 N.m at 400 V three phase 4.4 N.m at 480 V three phase |
| Nominal speed | 1000 rpm at 115 V single phase 2000 rpm at 230 V single phase 4000 rpm at 400 V three phase 4800 rpm at 480 V three phase |
| Maximum current Irms | 17.1 A |
| Shaft end | Parallel key |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Key width | 6 mm |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 100 mm |
| Electrical connection | rotatable right angled connector |
| Torque constant | 1.21 N.m/A at 120 °C |
| Back emf constant | 77 V/krpm at 20 °C |
| Number of motor poles | 4.0 |
| Rotor inertia | 2.31 kg.cm² |
| Stator resistance | 2.4 Ohm |
| Stator inductance | 6.75 mH |
| Maximum radial force Fr | 990 N at 1000 rpm 790 N at 2000 rpm 690 N at 3000 rpm 620 N at 4000 rpm |
| Maximum axial force Fa | 160 N |
| Type of cooling | Natural convection |
| Length | 204.5 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9.0 mm |
| Circle diameter of the mounting holes | 115 mm |
| Net weight | 5.8 kg |
| Sizing reference | SH31002P |
| Temperature copper hot | 130 °C |
| Output current 3s peak | 17.1 A |
| Inertia | 0.0 kg.cm² of brake 2.31 kg.cm² of motor |
For complete electrical ratings, applicable standards, connection requirements and installation instructions, consult the official Schneider Electric reference ↗.